Dive Rite NiTek He Manuel du propriétaire télécharger pdf (Page 9)

NiTek

/NiTek

Owner’s Manual Page 9

We refer to such instances as being in a particular display screen, rather than a

display mode.

Surface Mode

Surface Mode is the NiTek’s default mode. In this mode, the NiTek’s Liquid Crystal

Display (LCD) displays a minimum of date, time of day and Altitude Rank. Within

24 hours of surfacing from a dive, the NiTek may display additional information

while in Surface Mode.

Figure 3: Surface Mode. When at least 24 hours has passed since previous dives and

the NiTek determines there is no signiﬁ cant residual nitrogen present (and the cumulative

effect of exposure to elevated PO

s has sufﬁ ciently diminished), it displays only date, time

of day and Altitude Rank, as shown in the upper left.

➤ To enter this mode: The NiTek enters Surface Mode automatically upon surfacing

from a dive. Additionally, if you leave the NiTek in Dive Plan, Log Modes, or the

or Date/Time/Unit Set screens for from ﬁ ve to six minutes, without taking

further action, the computer will return to Surface Mode automatically.

What you will see: When the NiTek is in Surface Mode, it will display the

information appearing in Figure 3. This data will or may include:

1. Date—The format the NiTek uses to display the current date is that common in

the USA and Japan, in which the ﬁ rst set of one or two digits signiﬁ es the month,

and the second set of one or two digits (following the hyphen) signiﬁ es the day.

Thus, a date of 11-3 would represent the third of November.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 45 46

Pas de commentaire

Dive Rite NiTek He Manuel du propriétaire Page 9